Hi3536DV100

Time：December 3, 2024 Categories：FPV

OpenIPC Wiki

Table of Content

OpenIPC FPV ground station

News roundup

• It is now possible to record video to a connected SSD or USB stick
• Both HDMI and VGA outputs now work, there are no limitations in connected displays
• A lot of different things ;)

Upgrade from original HI3536DV100 NVR board firmware to OpenIPC FPV firmware

• Install PUTTY and TFTP server
• Download actual image for NVR from OpenIPC site
• Upload this image to your TFTP server
• Turn off NVR power, connect USB adapter to your NVR UART, specify which COM port on your PC
• Go to U-Boot with quick press Ctrl+C at power on
• Execute a set of commands each line separately

# Сhanging the ip address of the NVR board and the ip address of your TFTP server
setenv ipaddr 192.168.1.10; setenv serverip 192.168.1.254
mw.b 0x82000000 0xff 0x1000000
tftp 0x82000000 openipc-hi3536dv100-fpv-16mb.bin
sf probe 0; sf lock 0;
sf erase 0x0 0x1000000; sf write 0x82000000 0x0 0x1000000
reset

The result

Buy a device

• https://www.aliexpress.com/item/1005004023376532.html
• https://www.aliexpress.com/item/1005002358182146.html

Tags: none